Last Updated： Aggregation Period:Feb 04, 2026～Mar 03, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Feb 04, 2026～Mar 03, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Feb 04, 2026～Mar 03, 2026
This ranking is based on the number of page views on our site.
1～30 item / All 242 items
19-inch rack mount chassis for 1-port receivers of the EPoX series (EPoC/EPoT/EPo2) powered by a power adapter!
The CH-100 V2 is a 1-port receiver of the EPoX series (EPoC/EPoT/EPo2) that can accommodate up to 4 power adapter-powered units (XE10-110-RX/TE10-110-RX/2E10-110-RX) and 4 included power adapters in a 1U size 19-inch rack mount chassis. It allows for space-saving when installing multiple IP cameras.
19-inch rack mount chassis for 1-port receiver of the EPoX series (EPoC/EPoT/EPo2) for PoE power supply type!
The CH-110 V2 is a 1U size 19-inch rack mount chassis that can accommodate up to 8 units of the EPoX series (EPoC/EPoT/EPo2) 1-port receivers PoE powered types XE11-110-RX/TE11-110-RX/2E11-110-RX, or up to 8 units of the optional surge protectors SD-101/SD-301. It allows for space-saving when installing multiple IP cameras.
Uses a removable fiber port that can accommodate SFPs compliant with MSA standards.
Perle's SFP media converters convert UTP metal wire (copper) and optical fiber, from multimode to multimode and from multimode to single-mode optical fiber. The pluggable optical fiber port allows for flexible configuration and can use Perle or CISCO SFP transceivers, or MSA-compliant SFP products. Perle offers a wide range of SFP media converters that meet most optical fiber conversion requirements.
RCEI-530 is a PCI card compliant with ARINC 429.
High-Density PCI Interface for Simulation and Testing The RCEI-530 is available in various configurations to meet your needs, providing complete integrated data bus functionality for ARINC 429, ARINC 575, and selected two-wire 32-bit protocols. The RCEI-530 supports on-board message scheduling, label filtering, multiple buffering options, time tagging, error detection, and avionics level I/O discrete while supporting maximum data throughput across all channels with a 33MHz or 66MHz PCI interface. Configurations that support ARINC 717, ARINC 573, IRIG-B receivers (AM or DC/TTL), and generators (DC/TTL) are optional. By utilizing IRIG-B DC level signals, timestamp synchronization can be achieved across multiple boards.
DapTechnology's AS5643 interface card adopted for the F-35 project.
There is a growing demand for more streamlined hardware systems for processing AS5643 data streams used for defense purposes. In particular, advanced error insertion capabilities, which cannot be achieved with commercial link layer implementations, are required for simulation purposes. FireTrac is designed to natively support AS5643 (not just as an add-on protocol). In addition to standard IEEE1394 functionality, FireTrac is designed to provide hardware-level support for SAE AS5643, particularly alleviating the burden on the host processor for tasks such as packet encapsulation, data extraction, and receive/transmit STOF offsets. Importantly, FireTrac is highly accurate as it fully processes AS5643 transmission timing in hardware. Support for this protocol is built into the hardware, rather than relying solely on a software layer as is commonly provided by other solutions that depend on COTS OHCI chipsets. ■ Technical documentation in Japanese for AS5643 is available. If you would like to see it, please contact sales@nacelle.co.jp ■
Compact and robust gigabit Ethernet media converter (fiber-metal)
The MC700 series is a compact and robust design gigabit Ethernet media converter (fiber-metal). It also supports dual USB ports (minimum 800mA) or a power supply of 10-32V, enhancing its versatility. ■ Japanese technical documentation for MIL-STD-810, MIL-STD-461, and IP standards is available. If you would like to see it, please contact sales@nacelle.co.jp. ■
Optical MC compatible with 10BASE-T or 100BASE-TX that operates with both AC and DC.
This is an industrial media converter that can operate in harsh environments ranging from -40°C to +75°C, converting 10/100BASE-TX to 100BASE-FX for transmission. The lineup includes both ST and SC optical connectors, both of which support multimode, with a single-mode compatible model also available in SC. Only the ST model can operate with a power supply in the voltage range of AC 18-30V. Additionally, all products in the same series can operate within a voltage range of DC 12V to 48V. The multimode has a link budget (optical allowable loss) of 11.0dB, allowing for an extension of up to 2km, while the single-mode has a link budget of 17.0dB, enabling an extension of up to approximately 20km. Please use the customer's power supply for the AC power. Several variations of industrial power supplies with DC output are available as product options. Please refer to page 42 of the popular product catalog.
10/100/1000 industrial media converter operating at -40℃ to +65℃
The industrial 10/100/1000 media converter SISTG series connects 10/100/1000BASE-T twisted pair cables and converts them to multimode fiber (1000BASE-SX) or single-mode fiber (1000BASE-LX), allowing for transmission and extension. Its features include operation in a wide temperature range of -40°C to +65°C, making it a certified product suitable for harsh industrial or manufacturing environments classified as Class 1, Division 2. It also complies with EMI standards such as CISPR22/EN55022/EN60950 Class A, FCC Class A, CE mark, and EN61000-4-2/4-3/4-4/4-5/4-6/4-8/4-11/4-12/6-2/6-4. Additionally, there are products equipped with SFP slots that allow for the insertion of small form-factor pluggable (SFP) transceiver modules with various variations, enabling users to select transceivers with optimal fiber loss capabilities according to their needs. For 1000BASE-LX, it supports distances of up to 200 km with a permissible loss of 41.0 dB.
How about a mini-sized 10/100 Medicon that fits in the palm of your hand in that gap over there?
This is a mini-sized industrial product that operates in environments ranging from -40℃ to +75℃. It is a media converter that can extend IP camera data over fiber optic cable from a minimum of 2 km to a maximum of 20 km, and can be stored inside an outdoor enclosure/housing for surveillance cameras, with a 10/100BASE-TX to 100BASE-FX connection.
Simple, cost-effective integrated fiber optic solution.
The "Mini Media Converter" easily and cost-effectively integrates twisted pair and fiber optic equipment in infrastructure where conversion between different media types is necessary. With its compact design and limited functionality, it is ideal for applications with restricted physical space and where advanced network management is not required. It is a recommended solution for situations where "conversion is all that's needed" to expand the network. 【Features】 ■ Cost-effective at an affordable price ■ Recommended for spaces with constraints due to its small design ■ Standalone units cater to individual applications ■ Energy-efficient products consuming about 2.5W each ■ Simple and easy to set up *For more details, please refer to the PDF materials or feel free to contact us.
Industrial 10G Media Converter
Features ■ Compliant with IEEE 802.3ae, 10GBASE-SR/LR ■ NBASE-T adaptive bandwidth operation ■ Transfer speed of 10Gbps (when using Cat 6A/7 LAN cables, up to 100M) ■ Metal case ■ Energy-efficient operation
Industrial Gigabit Ethernet Converter
Features ■ Compliant with IEEE 802.3z, 1000BASE-SX/LX ■ NBASE-T adaptive bandwidth operation ■ Transfer speed of 1000Mbps (when using Cat 5/5e/6 LAN cables, up to 100M) ■ Metal case ■ Energy-efficient operation
Industrial Fast Ethernet Converter
Features ■ Compliant with IEEE 802.3, IEEE 802.3u 10/100BASE-TX, 100BASE-FX ■ NBASE-T adaptive bandwidth operation ■ Transfer speed of 100Mbps (when using Cat 5 LAN cable, up to 100M) ■ Metal case ■ Energy-efficient operation
Industrial Serial Ethernet Converter
Features ■ Compliant with IEEE 802.3u 100Base-FX ■ RS-232/422/485 to 100Base-FX ■ Metal case ■ Energy-efficient operation
Industrial Serial Ethernet Converter
Features ■ Compliant with IEEE 802.3u 100Base-FX ■ RS-232/422/485 to 100Base-FX ■ IP30 metal case ■ Energy-efficient operation
Industrial Serial Ethernet Converter
Features ■ Compliant with IEEE 802.3u 100Base-TX ■ RS-232/422/485 to 100Base-TX ■ Transfer speed 100Mbps (when using Cat 5 LAN cable, maximum 100M) ■ IP30 metal case ■ Energy-efficient operation
Industrial Serial Ethernet Converter
Features ■ Compliant with IEEE 802.3u 100Base-TX ■ RS-232/422/485 to 100Base-TX ■ Transfer speed 100Mbps (when using Cat 5 LAN cable, maximum 100M) ■ IP40 metal case ■ Energy-efficient operation
Industrial 2-Port 100/1000X SFP to 2-Port 10/100/1000T 802.3bt PoE+
Features ■ Hardware-based 10/100Mbps, half/full duplex and 1000Mbps full duplex mode, flow control, auto-negotiation, auto MDI/MDI-X ■ IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation ■ IP30 rated aluminum case ■ Wall mount and DIN rail ■ Supports 6000 VDC Ethernet ESD protection ■ Operating temperature of -40 to 75°C ■ No external power cable required for installation
Industrial Compact Media Converter 100/1000BASE-X to 10/100/1000BASE-T
Features ■ Hardware-based 10/100Mbps, half/full duplex and 1000Mbps full duplex mode, flow control, auto-negotiation, auto MDI/MDI-X ■ IEEE 802.3x flow control for full duplex operation and backpressure for half duplex operation ■ IP30 rated aluminum case ■ Wall mount and DIN rail ■ Supports 6000 VDC Ethernet ESD protection ■ Operating temperature range of -40 to 75°C
10G/5G/2.5G/1G/100M copper wire to 10GBASE-XSFP+ smart media converter
Features ■ One 10G/5G/2.5G/1G/100BASE-T RJ45 interface with automatic MDI/MDI-X functionality ■ One 10GBASE-X SFP+ slot ■ External 5VDC, 2A power supply ■ Wall-mount design ■ Supports 6000VDC Ethernet ESD protection ■ Operating temperature of 0 to 50°C ■ Plug and play installation
Moxa's industrial gigabit Ethernet switch
The industrial gigabit media converter is specially designed to provide industrial-grade media conversion between 10/100/1000BaseT(X) and 1000BaseSX/LX/LHX/ZX, ensuring reliable and stable operation in harsh industrial environments. ◆ The reliable industrial design of the IMC-101G allows for continuous operation in industrial automation applications. ◆ The IMC-101G gigabit media converter supports relay alarm output to prevent network damage and loss. ◆ The IMC-101G series comes in two models: one with a standard operating temperature of 0 to 60°C and another with a wide operating temperature range of -45 to 75°C. The IMC-101G is shipped after passing a 100% burn-in test. *For more details, please contact us. 【Moxa's Key Products】 Industrial Ethernet switches, serial device servers, media converters, secure routers, IP surveillance cameras.
Moxa's entry-level industrial media converter
The MOXA industrial media converter IMC-21 series is an entry-level media converter designed specifically for reliability and stability to meet the demands of harsh industrial environments, converting between 10/100BaseT(X) and 100BaseFX, or 10BaseT and 10BaseFL. The IMC-21 supports power input of 12V to 45V DC or 18V to 30V AC with high cost performance. It is capable of operating in a wide temperature range of -10°C to 60°C, making it suitable for installation alongside surrounding industrial Ethernet devices. *For more details, please contact us. 【Main products handled by Moxa】 Industrial Ethernet switches, serial device servers, media converters, secure routers, IP surveillance cameras.
Industrial Gigabit Ethernet to Fiber Media Converter
It provides reliable and stable 10/100/1000BaseT(X) to 100/1000Base-SX/LX or selected 1000Base SFP module media conversion. The IMC-21GA adopts green Ethernet technology compliant with IEEE802.3az, Energy Efficient Ethernet (EEE), which reduces power consumption and energy. It also supports 10K jumbo frames to enhance efficient transmission performance. Additionally, it is equipped with relay output warning alarms to help prevent damage and loss. All IMC-21GA models ensure high reliability through 100% burn-in testing. The converter offers models that support a standard operating temperature range of -10 to 60°C and models that support an extended operating temperature range of -40 to 75°C.
Industrial IEEE 802.3af PoE 10/100BaseT(X) to 100BaseFX media converter
The IMC-P101 series industrial Ethernet media converter provides Ethernet media conversion from 10/100BaseT(X) to 100BaseFX (SC or ST connector). The converter is classified as a Power Sourcing Equipment (PSE), which supplies power to connected devices. In this case, it can provide a maximum of 15.4W of power per port. The converter does not require additional power installation. The IMC-P101 converter offers an economical industrial Ethernet network solution that supports IEEE 802.3/802.3u/802.3x 10/100M, full duplex/half duplex, and MDI/MDI-X auto-sensing. • 10/100BaseT(X) auto-negotiation and auto MDI/MDI-X • IEEE 802.3af compliant PoE • Relay output for power failure alarm • Store-and-forward mode and cut-through mode • Operating temperature of -40 to 75°C (T model) • Redundant dual DC power input
Convert 10/100 BASE-TX to 100 BASE-BX.
The EL200 is a media converter that converts between 10/100BASE-TX and 100BASE-BX. You can choose between single-mode and multi-mode fiber optics. It uses an SC connector (single core). With the AUTO-MDI/MDI-X function and automatic recognition of full duplex/half duplex, you can use it without worrying about cross/straight cables. The EMC1600 19” media converter chassis can accommodate up to 16 units, and the EMC1200R media converter system can incorporate up to 12 units. For more details, please download the catalog or contact us.
Ideal for inter-base communication in locations with limited installation space or harsh temperature conditions!
The HMC-3000 series is a media converter that converts RJ-45 (10/100BASE-TX) to fiber optic (100BASE-FX). It supports transmission distances of up to 30 km in single mode. You can choose between SC2-core type and SC1-core type according to your installation environment. It has a wide operating temperature range of -40 to +75°C, making it highly resistant to environmental conditions. With its compact, lightweight, and robust design, it can be installed in various locations. It is ideal for inter-site communication in areas with limited installation space or harsh temperature conditions. For more details, please download the catalog or contact us.
For inter-base communication in locations with limited installation space or in environments with strict temperature conditions.
The KFC-241-L series is a media converter that converts RJ-45 (10/100BASE-TX) to fiber optic (100BASE-FX). It supports transmission distances of up to 2 km for multimode and up to 60 km for single mode. You can choose from SC2-core type, ST2-core type, or SC1-core type based on your installation environment. It has a wide operating temperature range of -40 to +70°C, offering excellent environmental resistance. With a compact, lightweight, and robust design, it can be installed in various locations. It is ideal for inter-site communication in areas with limited installation space or harsh temperature conditions. It is compliant with RoHS directives. For more details, please download the catalog or contact us.
